Contact This Exhibitor

  • 373 E. Industrial Blvd.
  • Pueblo West,  CO
  • 81007
  • United States

Company Description

GPS Networking is the first company to specialize in providing GPS products and solutions to enable you to effectively distribute the GPS signal throughout your facility. We are continually expanding & improving our line of GPS products which allow you to design the GPS Network that meets your application needs. With over 20 years of experience, we are the world leader in providing GPS Antenna Splitters, Amplifiers, Rack Mount Splitters, Re-radiating Kits and Fiber Optic Antenna Link systems.

Additional Information


 Products

  • Dual Antenna Rack Mount Amplified 2x16 GPS Splitte
    This Dual Antenna GNSS Rack Mount Splitter allows you to simultaneously distribute the antenna signal to 16 GNSS devices. The dual antenna design offers redundancy and keeps timing and testing applications functioning if an antenna fails....

  • This Dual Antenna GNSS Rack Mount Splitter allows you to simultaneously distribute the antenna signal to 16 GNSS devices. The dual antenna design offers redundancy and keeps timing and testing applications functioning if an antenna fails. It also is available with 32 distribution ports and has 4 connector choices.  Lead time can be next day shipping depending on option requirements.

    The DRMALDCBS2X16 GPS Rack Mount Amplified Splitter is a TWO input, sixteen output device.  The frequency response covers the GPS L1 & L2 bands with excellent gain flatness.  In the normal configuration, the splitter is powered by a receiver connected on J1 that supplies power to the splitter’s amplifier and roof antenna. The outputs are DC loaded with 200W resistors to simulate the antenna current draw.  Product is ideal for timing and testing applications where the GPS carrier signal is required by up to 16 GPS devices simultaneously.

    Electrical Specifications, T­A = 250C

    Parameter

    Conditions

    Min

    Typ

    Max

    Units

    Freq. Range

    Ant – Any Output, Unused Outputs - 50W

    1.1

    1.7

    GHz

    In/Out Imped.

    Ant, J1, J2, J3, J4, J5, J6, J7, J8

    50

    W

    Gain

     Ant – Any Output, Unused Outputs - 50W

    13

    14.5

    16.5

    dB

    Gain High Isolation

     Ant – Any Output, Unused Outputs - 50Ω

    -1.0

    0.0

    1.0

    dB

    Input SWR

    All ports - 50W

    2.0:1

    -

    Output SWR

    All ports - 50W

    1.5:1

    -

    Noise Figure

    Normal Config., Ant – Any Output, Unused Outputs - 50W

    3.8

    4.3

    dB

    Gain Flatness

    | L1 – L2 | ; Ant – Any Output, Unused Outputs - 50W

    0.5

    1

    dB

    Amplitude Balance

    | J1 – J2 | ; Ant – Any Output, Unused Outputs - 50W

    1.5

    dB

    Phase Balance

    Phase (J1 – J2) ; Ant – Any Output, Unused Outputs - 50W

    1.0

    deg

    Isolation

    Hi Isolation Config, Adjacent Ports, Ant - 50W (see plots)

    35

    dB

    Group delay Flatness

    td,max - td,min : Ant – J1, J16 - 50W

    5

    Ns

    Current

    Amplifier Current Draw, All ports - 50W

    15

    mA

    Mechanical

    Dimensions:

    • Height:  5.4”

    • Length: 18.0”

    • Width:        17.0”

    Weight:  13.6 lbs.

    Operating Temp. Range -40o to + 75oC


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".